Forums > Technical Discussion > switching fuel?
Login/Join to Participatemember
15 posts
Location: kansas
15 posts
Location: kansas
Posted:
when i first started doing fire spinning a few months ago i did some research and decided on using kerosene for my fuel. Now that i have been spinning for a bit and looked over some more posts about fuels i have been intrested in trying to switch to lamp oil. mostly because i have heard it doesn't produce as much smoke during the burn. my question is if i want to swith to lamp oil do i need to get a whole new set of heads or can i just start soaking my current heads in lamp oil instead of kerosene? i wasn't really sure if mixing the lamp oil and kerosene would mess anything up. just thought i would ask.
when i first started doing fire spinning a few months ago i did some research and decided on using kerosene for my fuel. Now that i have been spinning for a bit and looked over some more posts about fuels i have been intrested in trying to switch to lamp oil. mostly because i have heard it doesn't produce as much smoke during the burn. my question is if i want to swith to lamp oil do i need to get a whole new set of heads or can i just start soaking my current heads in lamp oil instead of kerosene? i wasn't really sure if mixing the lamp oil and kerosene would mess anything up. just thought i would ask.
SILVER Member
Are we there yet?
1,897 posts
Location: australia
Are we there yet?
1,897 posts
Location: australia
Posted:
shouldn't be a problem - I do it all the time - lamp oil one burn, kero the next, shell sol most of the time....
shouldn't be a problem - I do it all the time - lamp oil one burn, kero the next, shell sol most of the time....
member
26 posts
Location: PHX, Arizona
26 posts
Location: PHX, Arizona
Posted:
or try playing with your ratio of kero to lamp oil....
I use a 50/50 mix, or well it's more like a set of guide lines, esp. when it's dark!
or try playing with your ratio of kero to lamp oil....
I use a 50/50 mix, or well it's more like a set of guide lines, esp. when it's dark!
Yesterday I thought I could not.
Today I am certain I can.
SILVER Member
member
55 posts
Location: a mountaintop in Colorado, USA
member
55 posts
Location: a mountaintop in Colorado, USA
Posted:
I mix, too. About 70% kero, 20% lamp oil and the last 10% coleman (White gas) for a nice easy ignition at the start. Burns nice, smells great!
I mix, too. About 70% kero, 20% lamp oil and the last 10% coleman (White gas) for a nice easy ignition at the start. Burns nice, smells great!
take the schneak-tip
GOLD Member
Pooh-Bah
2,110 posts
Location: Philadelphia, PA - USA
Pooh-Bah
2,110 posts
Location: Philadelphia, PA - USA
Posted:
I dont really see the point in mixing kero and lamp oil cuz they're both basically the same except kero is dirtier. I use Lamp Oil all the way and occasionally just pour a small amount of Coleman on after a dunk for the quick light... Though, even that isnt really necessary unless its really windy out or something.
But to answer the initial question, yes, its ok to use different fuels on the same wicks. Just try not to switch up too often.
I dont really see the point in mixing kero and lamp oil cuz they're both basically the same except kero is dirtier. I use Lamp Oil all the way and occasionally just pour a small amount of Coleman on after a dunk for the quick light... Though, even that isnt really necessary unless its really windy out or something.
But to answer the initial question, yes, its ok to use different fuels on the same wicks. Just try not to switch up too often.
Let's turn those old bridges we crossed into ashes.
We'll blaze a new trail,
and torch the rough patches.
-Me
SILVER Member
journeyman
91 posts
Location: Houston, TX, in my chair, USA
journeyman
91 posts
Location: Houston, TX, in my chair, USA
Posted:
Either way's good, if you use lamp oil try Ultra Pure, it's virtually smokeless. Walmart carries a pretty good stock of for about $4 a bottle. It's a it more expensive to than white gas or the like because you don't get as much of for the same price. Also oil gets a slightly longer burn i thinnk than white gas or kero because it's heavier... at least that's what I've noticed.
Either way's good, if you use lamp oil try Ultra Pure, it's virtually smokeless. Walmart carries a pretty good stock of for about $4 a bottle. It's a it more expensive to than white gas or the like because you don't get as much of for the same price. Also oil gets a slightly longer burn i thinnk than white gas or kero because it's heavier... at least that's what I've noticed.
May the flame on your balls not be too hot
© 1998 - 2026 Home of Poi
All prices converted to United States dollars using XE.com